deskthority

Posted: **19 Mar 2015, 10:19**

I try but my bank wont process the payment and i dont know whats wrong

Posted: **19 Mar 2015, 18:46**

Are you still looking for microswitches? Maybe these from velleman?:
http://www.vellemanusa.com/products/view/?id=350709

The company I work for buys them for about 0.35€/pcs

Posted: **20 Mar 2015, 12:03**

No, thanks, but maybe you should buy some and compare them to Omrons.

Posted: **21 Mar 2015, 11:00**

Code: Select all

Order-ID               |stock|price |description
HYPER/MICRO/P1         |    8|20 EUR|Prototype PCB  (4x12; req. TEENSY20)
HYPER/MICRO/7BITH      |    7|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM100H    |    3|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM700H    |    9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI100H   |    9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI400H   |    7|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI700H   |    9|10 EUR|plate with trackpoint-hole

Posted: **21 Mar 2015, 21:52**

7bit,

i am a little to late..

but can i stil order a teensy++
some diodes and keys?

i don't need a pcb

Posted: **22 Mar 2015, 13:34**

Yes, sure!

BTW:
There are still PCBs 'available'.

Posted: **24 Mar 2015, 22:14**

Hi, i would like to buy cherry stabilizers to replace the one i have on my code keyboard.
Can you please tell me which one i need?

Posted: **24 Mar 2015, 22:36**

Currently, I only have 7 units stabilisers for plate mounting. Others will be available soon.

What is a "code keyboard"?

Posted: **24 Mar 2015, 22:36**

WHERE IS MY HYPERMICRO?

DID YOU ORDER IT YET?

Posted: **24 Mar 2015, 22:49**

Yes, but it takes a while ...

Posted: **24 Mar 2015, 23:05**

Wasd CODE keyboard

Posted: **25 Mar 2015, 00:19**

Posted: **25 Mar 2015, 00:27**

http://www.wasdkeyboards.com/index.php/ ... board.html

Posted: **25 Mar 2015, 00:30**

@manna not to be rude but you are in the wrong thread. this is a thread for a specific project. additionally the code has a 6.25 length spacebar with costar stabilizers which are plate mounted, im not sure how you plan on swapping it out.

Posted: **25 Mar 2015, 08:52**

Hi 7bit, i paid Saturday for my order with paypal but i didn't see any email that confirm that cherrymx received the money.
How can i know that it's all ok?
Thank you,

Dan

Posted: **25 Mar 2015, 14:02**

Thanks

Posted: **25 Mar 2015, 15:44**

in case anyone needs predremeled GHB cherry doubleshots, i still have like 20 sets of my ansi caps i salvaged from DESKO boards with trackpoints. #threadcrap #ninja

Posted: **25 Mar 2015, 16:02**

mmmlink?

Posted: **28 Mar 2015, 15:55**

Re the earlier layout discussion:
I'd love a board w/ the vertical depth of a 60 yet has F-keys but no numpad on the right. Basically a 60 + left side F-columns or left side num/fn/macro block.

Why? A right side num pad forces the mouse to the right. This not only causes me tremendous shoulder RSI pain, it also moves the coffee mug further to the right!

I need my coffee close!!

Far away coffee-->less coffee--> less work-->less $$$-->fewer group buys-->sadness

-r

Posted: **28 Mar 2015, 23:31**

You mean this:

: uploadfromtaptalk1427581768061.jpg (120.63 KiB) Viewed 6741 times

Taken from a Reddit thread.

Posted: **29 Mar 2015, 01:56**

Nope. Where's the left side function columns?

That layout is what I call "Functionkeyless":

I think it's a pretty appealing form factor, as function keys work very nicely on a layer through the numrow. The wide, slim look is quite distinctive.

Posted: **29 Mar 2015, 08:00**

Ah, thanks! I find it appealing as well.

Posted: **30 Mar 2015, 03:12**

I love it....if only the extras were on the left! Like so:
<7 hours pass in Photoshop.....>

: foobar; Image-2-small.jpg (375.27 KiB) Viewed 6744 times

Imagine also that the arrow keys are there on the right. I couldn't edit that together

Maybe via split shift or something like this :

: HyperMacro++ ?; Image 3.jpg (161.55 KiB) Viewed 6744 times

This would be awesome.
-R

Posted: **30 Mar 2015, 03:36**

Maybe you could try http://keyboard-layout-editor.com, it might be easier to use.

Posted: **03 Apr 2015, 11:35**

Do you have an idea when production will be done?

Posted: **06 Apr 2015, 10:59**

Can I still order?

Posted: **06 Apr 2015, 11:00**

Yes.

Posted: **06 Apr 2015, 12:21**

What stabs do I need for a Ansi 6,25 layout ?

Posted: **06 Apr 2015, 12:29**

STAB625

Posted: **15 Apr 2015, 15:41**

WHERE ARE THE PCBS?
DID THEY ARRIVE YET?

deskthority

HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o

Re: HyperMicro / Deadline: 2015-03-17 / -4 days to go! :o

Re: HyperMicro / Deadline: 2015-03-17 / -4 days to go! :o