Page 654 of 876
Posted: 15 Mar 2018, 11:17
by hansichen
It's even used and kinda dirty on the plate, and the caps are most likely abs caps, no idea who was that stupid...
Posted: 15 Mar 2018, 11:20
by andrewjoy
Back in te' day you could get a dell for like a fiver !
I blame russia they must have hacked ebay.
Posted: 15 Mar 2018, 11:50
by Blaise170
Fujitsu Peerless board, only $300! Act fast before it's GONE!
Posted: 15 Mar 2018, 12:59
by Elrick
RealityCavesIn wrote:
Wait...it sold for 765$!?!? What the actual fuck indeed.
You see, when even an old Alps Dell, with no mention of any coloured switches, gets sold for that amount.
I remembered a few weeks back some of you lot here on this Forum site ridiculing me for mentioning those prices, hate to now show you the TRUTH on pricing but do expect, to see more lunacy as further old keyboards get off loaded.
Flebay is certainly living up to ALL expectations when it comes to old Dell Keyboards
.
Posted: 15 Mar 2018, 16:35
by balotz
Time to list my old logo AT101!
Posted: 15 Mar 2018, 16:57
by //gainsborough
balotz wrote: Time to list my old logo AT101!
I just got a clean one - like almost pristine - for like $75 after shipping off eBay...I've already sold the switches and harvested the caps for an omnikey 101 project.... I think I made a grave mistake.
Posted: 15 Mar 2018, 18:54
by Iggy
Posted: 15 Mar 2018, 20:29
by Tuntematon
I think it's the same couple buyers that are always in on these boxed Dell AT-101s. The runner-up with the ridiculously high feedback score I recognize for sure, they've won several over the past year or two. No idea what the motivation is.
Posted: 15 Mar 2018, 20:35
by Slom
green-squid wrote:
Slom wrote: Could somebody please talk me out of this one?
[...] The computer is much cooler [...]
Well, that did not really help
webwit and Noobmaen and JP! wrote:
You need the money for your future purchases in the Exotics Boutique [...] it's Micro Switch SD [...] It will take up precious space
That did the trick though, thanks guys
Myoth wrote: green-squid wrote:
Why would you only want it JUST for that damn keyboard? The computer is much cooler (unless you just want to yank it out of there, I can't talk you down)
i don't think he was talking about the keyboard ....
Well, what if I would want it for JUST the caps
Posted: 15 Mar 2018, 20:38
by green-squid
Slom wrote:
Well, I would want it for JUST the caps
Posted: 15 Mar 2018, 20:38
by green-squid
Posted: 15 Mar 2018, 20:43
by green-squid
but yes, it's a better deal because you have to buy in bulk to get them cheap on Alibaba.
Posted: 15 Mar 2018, 20:44
by Iggy
Oh wow, are those any good?
Posted: 15 Mar 2018, 20:47
by green-squid
Iggy wrote:
Oh wow, are those any good?
Chyros said they are pretty good, but they are very expensive. $80 for a 60%, and it has butt-ugly keycaps.
Posted: 15 Mar 2018, 20:49
by Slom
Posted: 15 Mar 2018, 21:00
by green-squid
Corsair K70 Lux in Poland, 30 euros shipped, basically brand new. Good deal if you're in europe and need a budget keyboard.
https://www.ebay.de/itm/Corsair-K70-LUX ... 0009.m1982
Posted: 15 Mar 2018, 21:02
by digital_matthew
OhcoolI'mgonnabuyitandseeifitfitsmyXT...(looks at price)...
Posted: 15 Mar 2018, 22:03
by tron
It's back........again
For $250 less. Question. Is it possible to scan/3-D print that flip out wrist panel? What are the odds that the PCB is fire damaged? How hard would it be to design a new PCB based on emdudes work? (assuming you have no knowledge of electronics engineering technology)?
I asked the seller to open it and take shots of the PCB so he would have a higher chance of selling it. He said thanks but didn't take my advice
Posted: 15 Mar 2018, 22:05
by green-squid
tron wrote:
It's back........again
For $250 less. Question. Is it possible to scan/3-D print that flip out wrist panel? What are the odds that the PCB is fire damaged? How hard would it be to design a new PCB based on emdudes work? (assuming you have no knowledge of electronics engineering technology)?
I asked the seller to open it and take shots of the PCB so he would have a higher chance of selling it. He said thanks but didn't take my advice
Oh no! Oh no! Somebody bough it!
Posted: 15 Mar 2018, 22:08
by Brett MacK
green-squid wrote: tron wrote:
It's back........again
For $250 less. Question. Is it possible to scan/3-D print that flip out wrist panel? What are the odds that the PCB is fire damaged? How hard would it be to design a new PCB based on emdudes work? (assuming you have no knowledge of electronics engineering technology)?
I asked the seller to open it and take shots of the PCB so he would have a higher chance of selling it. He said thanks but didn't take my advice
Oh no! Oh no! Somebody bough it!
Nope it can be yours for the low low price of 750 Dollars!
https://www.ebay.com/itm/253493361719?V ... 3493361719
Posted: 15 Mar 2018, 22:18
by webwit
You could probably salvage at least 50 beam spring switches from that keyboard. Some keycaps too. Sell them on the echo bay for profit.
Posted: 15 Mar 2018, 22:19
by Myoth
pls, I want some for my beamer don't want to pay 20€ for them each
Posted: 15 Mar 2018, 22:20
by webwit
Yes yes 20 euro!!!
Posted: 15 Mar 2018, 22:20
by tron
webwit wrote: You could probably salvage at least 50 beam spring switches from that keyboard. Some keycaps too. Sell them on the echo bay for profit.
It may take quite a while to sell them at 20/piece. Not sure if it's worth the opportunity cost.
I would buy some of the caps if anyone ends up getting it
Posted: 15 Mar 2018, 22:24
by webwit
tron wrote: I would buy some of the caps if anyone ends up getting it
20 euro per cap. You
need those caps to restore your own crap beam spring to former glory.
Posted: 15 Mar 2018, 22:26
by tron
webwit wrote: tron wrote: I would buy some of the caps if anyone ends up getting it
20 euro per cap. You
need those caps for your own crap beam spring.
At that price I will just go with selectric
I just need a few because my cap mounts are breaking down a bit
Posted: 15 Mar 2018, 22:48
by ekeppel
I just made an offer on that 3279, but immediately regret doing so.
Only after submitting it did I realize that this is the same seller that did not honor my original purchase of a different beamspring a week or so ago.
It's highly doubtful that he'll accept anyway, even though my offer is very reasonable considering the horrendous condition of this board. Given that the seller lists a large number of keys that aren't clicking properly, I can only imagine what the PCB looks like. I'm only looking at it for parts anyway.
Posted: 15 Mar 2018, 22:58
by Ir0n
ekeppel wrote: I just made an offer on that 3279, but immediately regret doing so.
Only after submitting it did I realize that this is the same seller that did not honor my original purchase of a different beamspring a week or so ago.
It's highly doubtful that he'll accept anyway, even though my offer is very reasonable considering the horrendous condition of this board. Given that the seller lists a large number of keys that aren't clicking properly, I can only imagine what the PCB looks like. I'm only looking at it for parts anyway.
That's funny because they told me they'd accept my offer then turned it down and said they were already getting higher offers.
The seller seems really shady..
Posted: 15 Mar 2018, 23:00
by JP!
I wonder how this 3279 was burned. Maybe some kids took a blow torch to it or something. If this were a contemporary keyboard I would have tossed it without a second thought. At least it survived though. I would love to excavate some landfills for stuff like this.
Posted: 15 Mar 2018, 23:01
by JP!
Ir0n wrote: ekeppel wrote: I just made an offer on that 3279, but immediately regret doing so.
Only after submitting it did I realize that this is the same seller that did not honor my original purchase of a different beamspring a week or so ago.
It's highly doubtful that he'll accept anyway, even though my offer is very reasonable considering the horrendous condition of this board. Given that the seller lists a large number of keys that aren't clicking properly, I can only imagine what the PCB looks like. I'm only looking at it for parts anyway.
That's funny because they told me they'd accept my offer then turned it down and said they were already getting higher offers.
The seller seems really shady..
*This seller is really shady.
