Page 78 of 159
Posted: 02 Nov 2015, 11:31
by gogusrl
Need pics of the g80-0081.
Posted: 02 Nov 2015, 11:33
by scottc
ettasian wrote: How much would be a G80-1000HAD German set of thick Cherry doubleshots?
Probably about 25-30 euro.
And the whole board?
Maybe 50 euro ish!
What about Wyse PCE US layout thin doubleshots? And again the whole board?
Not sure! Probably less than the G80? Worse layout and worse caps but nicer legends (for non-Germans, anyway).
G80-3000HAD with PBT keycaps?
If it's a HAD, then it's doubleshot ABS - not PBT. Probably similar to G80-1000 but slightly less since the 3000 has worse build quality and the 1000 might have NKRO if it has diodes (can't remember).
Terminal M's?
Probably like 30 euro again, depending on layout/etc maybe plus or minus a bit.
@gogusurl, pics of the 0081 are in a different thread.
And something I'm just curious about
G80-0081, presumably the first G80 Model, with awesomely thick and colorful spherical keycaps and the original box?
Almost mint condition, just some yellowing on the white parts of the keycaps and rust on some bolts. Propably never going to work with your computer

No idea, probably just a trade for something nice. I'd trade for it but it's way too big for me!
Edit: broken quotes!
Posted: 02 Nov 2015, 11:35
by ettasian
gogusrl wrote: Need pics of the g80-0081.
Pretty much everything is here:
http://deskthority.net/keyboards-f2/g80 ... 11915.html ;
http://imgur.com/a/UKI9f ;
http://imgur.com/a/HW7WG
Official photoshoot incoming propably late this week or early next week.
Posted: 02 Nov 2015, 11:39
by ettasian
scottc wrote: ettasian wrote: How much would be a G80-1000HAD German set of thick Cherry doubleshots?
Probably about 25-30 euro.
[quoteAnd the whole board?
Maybe 50 euro ish!
[quote[What about Wyse PCE US layout thin doubleshots? And again the whole board?[/quote]
Not sure! Probably less than the G80? Worse layout and worse caps but nicer legends (for non-Germans, anyway).
G80-3000HAD with PBT keycaps?
If it's a HAD, then it's doubleshot ABS - not PBT. Probably similar to G80-1000 but slightly less since the 3000 has worse build quality and the 1000 might have NKRO if it has diodes (can't remember).
Terminal M's?
Probably like 30 euro again, depending on layout/etc maybe plus or minus a bit.
@gogusurl, pics of the 0081 are in a different thread.
And something I'm just curious about
G80-0081, presumably the first G80 Model, with awesomely thick and colorful spherical keycaps and the original box?
Almost mint condition, just some yellowing on the white parts of the keycaps and rust on some bolts. Propably never going to work with your computer

No idea, probably just a trade for something nice. I'd trade for it but it's way too big for me![/quote]
Wow, that was fast
The G80-3000 was actually G80-3000LPMDE, I think it's not doubleshots.
And that particular G80-1000HAD is 15KRO I think.
Thanks!

Posted: 02 Nov 2015, 11:51
by scottc
Ah yes, if it's LPMDE then it's probably got 1.25 mods, Windows keys and thin grey PBT. Those are worth a bit less unfortunately. I've seen people selling them for 20 euro ish since the caps aren't worth much.
Posted: 02 Nov 2015, 11:52
by ettasian
scottc wrote: Ah yes, if it's LPMDE then it's probably got 1.25 mods, Windows keys and thin grey PBT. Those are worth a bit less unfortunately. I've seen people selling them for 20 euro ish since the caps aren't worth much.
Thanks again

Posted: 02 Nov 2015, 11:53
by scottc
No problem!

Posted: 02 Nov 2015, 12:00
by ettasian
One more thing: Is B80-3766 of any value?

Covered M8 switch. The Caps Lock lights up when connected, but since it's not compatible with modern computers, nothing else happens.
Posted: 02 Nov 2015, 12:11
by scottc
I'm not sure of any particular value, but it's an interesting one for a collection. I'd be interested in taking it off your hands if you didn't want it any more.
Posted: 02 Nov 2015, 12:26
by ettasian
scottc wrote: I'm not sure of any particular value, but it's an interesting one for a collection. I'd be interested in taking it off your hands if you didn't want it any more.
I actually already have a deal pending on that one (involving multiple terminal M's), but I can tell the guy I trade with, that you're interested

Posted: 02 Nov 2015, 12:55
by scottc
Damn, that's a shame. It's a cute little board. Let me know! Feel free to PM me.

Posted: 02 Nov 2015, 14:57
by ziggy1283
Hey there, first post! I was directed here from reddit; looking for some advice on the value of a G80-0499. I've been posting a bit about it
here. I don't have any updated photos since I started cleaning it, but it is cleaning up quite nicely.
Anybody have some advice?
Posted: 02 Nov 2015, 15:06
by lolpes
Commodore board, bad condition, so good for the switches and caps only(white ones are yellowed), I think the estimates that were given to you in reddit are pretty accurate: 35$ - 45$
Posted: 02 Nov 2015, 20:35
by ziggy1283
Thanks for the response. Essentially I've got 83 vintage MX Blacks, 4-and-a-half pairs of screw-in stabs, and a shiny set of classic doubleshot ABS caps. I can't seem to find a definitive answer about actually using the board. I've read that a teensy mod will work, but also that Commodore keyboards won't work even when modded.
Posted: 02 Nov 2015, 20:44
by gogusrl
I love the look of those oversized numlock / esc / scrolllock / etc.
Posted: 03 Nov 2015, 17:53
by guk
Fair price for ANSI IBM M keycap set (two-piece)?
Posted: 03 Nov 2015, 17:54
by XMIT
Around 20 USD I think, at the most.
Posted: 03 Nov 2015, 17:56
by guk
Sounds good, was thinking 20€ including tracked shipping, which costs ~6€.
Posted: 07 Nov 2015, 21:15
by chiptea
Hi!
How much do you think a Nissho KB106DE in fair condition would be worth?
How about an Epson Business Full? I'm getting both, but I'd just like to know how much I should spend

Posted: 07 Nov 2015, 23:18
by ettasian
How much would be worth 3178 Model F in decent condition?
Posted: 07 Nov 2015, 23:21
by chiptea
Blue switch? I'd say $40-50 if it's non converted. $20ish more if it is.
Posted: 07 Nov 2015, 23:25
by ettasian
chiptea wrote: Blue switch? I'd say $40-50 if it's non converted. $20ish more if it is.
What does "blue switch" refer to? It's capacitive buckling spring switch. And if it's about the logo, it's grey.
Posted: 07 Nov 2015, 23:29
by chiptea
I'm referring to this:
https://linuxious.com/images/gallery/ke ... tion_2.jpg
I'm assuming that's what you've got from the model number you gave.
Actually my initial estimate might have been a little high. If it's that one, then 30-50 is probably where it's at.
Posted: 07 Nov 2015, 23:30
by ettasian
chiptea wrote: I'm referring to this:
https://linuxious.com/images/gallery/ke ... tion_2.jpg
I'm assuming that's what you've got from the model number you gave.
Actually my initial estimate might have been a little high. If it's that one, then 30-50 is probably where it's at.
Ooh, yes. Yes it has the blue switch. Thanks! :3
Posted: 07 Nov 2015, 23:31
by chiptea
No problem. I hope I'm right on the estimate. It's a neat board!
Posted: 08 Nov 2015, 20:13
by wanabe
I don't recall how or when I acquired these, but they've been sitting in my closet for a while. I'm guessing only a hardcore Cherry collector would be interested
Cherry G81-1900 HEF
Serial #s 001 and 002

Posted: 08 Nov 2015, 20:22
by Sayso
Posted: 08 Nov 2015, 20:32
by guk
Oh, photekq's already here, so I don't need to guess.
Posted: 08 Nov 2015, 20:44
by photekq
I think 75EUR each is a fair price since they have NIB French doubleshots. Honestly, I don't think the 1 and 2 serial numbers really mean anything when it comes to the value. At least I don't care about it, and I do consider myself a "hardcore Cherry collector"

Posted: 08 Nov 2015, 22:23
by DanielT
But we have an AZERTY defender here that might find these interesting
