deskthority

Sure, that’s why Filco keys fit perfectly on Cherry stabilizers. (Can’t test a spacebar though, for obvious reasons, but the SP spacebar doesn’t make any problems anyway) Do you actually know what you’re talking about, or are you just guessing?

Geekhack wrote: 3. stabilizer mount changes. in old one. we had stabilizer mounting problem(only for majetouch type stabilizer, it was too loose. cherry fits).

Yes, I know and I hope SP does not mess up the keys. Height and and mounts are perfect as they are. Otherwise they would fit too tight.

Payment from jil_jil32 has been received and marked as shipped for PP (although we all know that we are looking at 3 or so month for the caps to be produced, shipped for sorting, then shipped to their final destination, i.e. you). That is to avoid PP account lock ups, that they like to do. Invoices may or may not reflect the change, but they will. Please keep in mind I only account for payments made to me, not to megnin or IBAN.

Why? Have you ever seen different keys for different stabilizers? I haven’t, and all sets that work with costar stabs work as well with Cherry ones. I can show you pictures of PCB and plate mounted Cherry stabs with Filco keys on them, if you want.

Lol, even original Cherry keys work with Costar stabilizers! Only SP screwed up. But yes, I am sure that original Cherry keys are worse for Cherry stabilizers than SP keys.

(Cherry dye sub backspace)

I'm too lazy to read that GH thread. What do they want to do to make them fit better?

(Please keep in mind that it is easy to put somne piece of a plastic bag into the mounts but no so easy to find new stabiliser mount once they had been broken through when removing the space bar ...)

Are there cases of broken stabilizer mounts with too tight fitting keys designed for Costar stabilizers?

Ahoocom didn’t mention that. Just that he was surprised, too. It’s just those 3 posts. Melissa might know more.

Zehkul wrote:Are there cases of broken stabilizer mounts with too tight fitting keys designed for Costar stabilizers?

Ahoocom didn’t mention that. Just that he was surprised, too. It’s just those 3 posts. Melissa might know more.

I just gave it a try on the numpad Enter: They are too tight already!

I will tell Melissa to make them a bit wider.

Yes, of course, Cherry made wrong keys, all their keys don’t fit on their own stabilizers. :p

Sorry to interrupt! 7bit - PMed - something a bit awry with my last invoice - cheers

Zehkul wrote:Yes, of course, Cherry made wrong keys, all their keys don’t fit on their own stabilizers. :p

Cherry: key caps fit perfect!
SP: quite tight, but tolerable.

BTW: What is the reason for this discussion?

blighty wrote:Please keep in mind I only account for payments made to me, not to megnin or IBAN.

So how can I know that I paid or not yet if I paid to megnin? Now I have 3 invoices in my mailbox This is my 1st time work with this kind of payment, lack of exp

Bimgao wrote:

blighty wrote:Please keep in mind I only account for payments made to me, not to megnin or IBAN.

So how can I know that I paid or not yet if I paid to megnin? Now I have 3 invoices in my mailbox This is my 1st time work with this kind of payment, lack of exp

Just wait until megnin updated the list.

7bit wrote:

Zehkul wrote:Yes, of course, Cherry made wrong keys, all their keys don’t fit on their own stabilizers. :p

Cherry: key caps fit perfect!
SP: quite tight, but tolerable.

Then it’s not an issue with the outer stems but instead with the inner one, or something entirely different. Cherry stem holes are smaller than SP ones.

Payment from feng(2012-09-11) has been received and marked as shipped for PP (although we all know that we are looking at 3 or so month for the caps to be produced, shipped for sorting, then shipped to their final destination, i.e. you). That is to avoid PP account lock ups, that they like to do. Invoices may or may not reflect the change, but they will. Please keep in mind I only account for payments made to me, not to megnin or IBAN.
(Wash, rinse, repeat).

Woops I overpaid, how should I request a refund! Sorry for the hassle, looking forward to this! (asking publicly in case anyone else is in this boat)

chronos wrote:Woops I overpaid, how should I request a refund! Sorry for the hassle, looking forward to this! (asking publicly in case anyone else is in this boat)

You can:

- order more (recommended)
- order Cherry MX switches (recommended)
- wait for another group buy
- ask for a refund (not recommended)

Last bit of payment sent.
Surprising that you still have a list of available items, I believed you would submit a new order to SP and therefore that there would be no extras to order from before everything would have been shipped and received.

zulios wrote:Last bit of payment sent.
Surprising that you still have a list of available items, I believed you would submit a new order to SP and therefore that there would be no extras to order from before everything would have been shipped and received.

I can't let them produce mini series of keys and then there are always latecomers. People who forgot to order space bars etc.

BTW: You can still order the sold out items, just write me a message. But tomorrow I send the order out.

I've fully paid, but for some reason my account is still showing as $22.86 required.

I sent that payment to megnin's email address on the 3rd September, maybe it's been misplaced somehow, since my payment of $33.57 on the 8th has been deducted.

would you KINDLY remove that mail-address, please?

probably everything is fine, wait until megnin posts updates here. he usually updated once a week earlier, but now i think he will today or tomorrow and posts all infos here.
nothing to worry, i think.

>MadScienitst46
What you do, is you email and PM him. He will get the message. (IOW, mini spam back)

7bit wrote:I can't let them produce mini series of keys and then there are always latecomers. People who forgot to order space bars etc.

BTW: You can still order the sold out items, just write me a message. But tomorrow I send the order out.

There have been so many interesting options in this GB that it's difficult to tell yourself you are letting unique options pass by, but well. Now let's hope SP will do the job right.

>7bit
I'll clear out the Noir keys. Do I pm 7bit_r4 or just you?

I just got an invoice that seems a little confusing to me. I've paid but it seems to be asking for payment.

It has a line saying

"Invoice #XXXX for gbohn (Please pay now or I clear your order!)"

and also shows that I'm paid up. Lines later in the same message show

"Amount Due | | | | | 0.00

Everything has been paid up to the penny!"

So, did anyone else who's already payed up get the warning about "Please pay now"?

Hi, I paid in full months ago, but today I got an invoice saying I need to pay $2.45 within one day or my order will be cleared. Will you please explain why this is the case? I went through several recent pages of this thread and didn't see an explanation.

Thanks.

Enki wrote:Hi, I paid in full months ago, but today I got an invoice saying I need to pay $2.45 within one day or my order will be cleared. Will you please explain why this is the case? I went through several recent pages of this thread and didn't see an explanation.

Thanks.

Well, I found an older email with the same additional charge, so I guess I just missed the earlier notice. I don't love getting an additional charge after I've already paid, but I guess it's par for the course.

Hello! I just discovered this awesome Group Buy. I have two quick questions.

1. Is it too late to add my order?
2. If not, what would the shipping cost for a TENKEYLESS set + DVORAK set to Alberta, Canada? I tried to find shipping price info in the wiki, but maybe I am just blind.

Thanks,
-- fydo

bizarrely, i have basically the same questions and am also from alberta, canada.
i saw this guy on reddit: http://imgur.com/RNoRS
and i figured i should see if i could get in on EXACTLY that set of keys (for a full 104 filco majestouch).

blackadde wrote:i saw this guy on reddit: http://imgur.com/RNoRS
and i figured i should see if i could get in on EXACTLY that set of keys (for a full 104 filco majestouch).

Just as a note, I think you'll need the ROUND3/STANDARD and the ROUND3/GAMER/ORANGE to get that set of keys as in the photo there.
EDIT: Oh, don't forget a spacebar too!