deskthority

I'm very sorry derzemel.
I started Local GB(http://www.kbdlab.co.kr) but Global GB for DT is not yet.
I shoud have to get the PG certification from Paypal through Inicis(Local PG).
They say it will takes 2 weeks more.
Maybe three weeks later, you can join this GB for DT.
I cann't sure but I'll try.

chanlol wrote: i'm very very interested in LK-1800fe and i've bought TX-1800 today. BUT LK-1800fe is that what i called 1800! it's awesome! It's fatanstic!
Could you desgin a english version website(http://www.kbdcraft.com).Korean is a little hard to reading for most dt member.
Is the PCB( By LeeKu) included in GB ?

Yes I prepared that site but there's some problems but I tried to get rid all problems now.
At first, this site's first promo is just for Local users (for exam... http://www.kbdlab.co.kr ).
And then I'll start global GB for DT on the next time.
I shoul have to get the PG certification from Paypal.
It will finish in three weeks later.
I'll be back soon with a good news for you.

Can you give us an approximate price for the case + plate?
So we know what to expect

derzemel wrote:Can you give us an approximate price for the case + plate?
So we know what to expect

Yes sure. But you have to wait for closing local GB.
And then I'll start it.
Now I try to get PG certification.
Actually I dunt know about tax and transport rules to abroad.
So I need a little bit time for learnning it.
Plz be patience for me. Thank you!

I just wanted to order a leeku pcb from your site, http://kbdcraft.com, but they only ship to korea.
Will there be internation shipping availiable soon?

ljfkidd wrote: I just wanted to order a leeku pcb from your site, http://kbdcraft.com, but they only ship to korea.
Will there be internation shipping availiable soon?

Yes, sure. I'll prepare GB for DT soon.
Not so far from now.

kbdcraft wrote:

ljfkidd wrote: I just wanted to order a leeku pcb from your site, http://kbdcraft.com, but they only ship to korea.
Will there be internation shipping availiable soon?

Yes, sure. I'll prepare GB for DT soon.
Not so far from now.

Ok, looking forward to the GB.

I posted on the GH thread already but here goes. I'm already in for the TX1800 (which was delayed) please tell me this one is not happening soon. I need to recharge.

SL89 wrote: I posted on the GH thread already but here goes. I'm already in for the TX1800 (which was delayed) please tell me this one is not happening soon. I need to recharge.

Ah... good to see you in here. I moved GH to DT.
I think DT is more comfortable community to me.
My international GB will be start from here.
Now I'm on getting certification for Pay Gate; for exam Pay Pal and credit card checkout.
Be more patience. It will closed for GB.
When my preparation for GB, I'll write new GB notation for all DT members.

* My whole production schedule is...
2~3 weeks for factory works + 2 weeks for delivery...That's all.

The GB will be about 230$ ?

chanlol wrote:The GB will be about 230$ ?

No!
That price is just for limited open promotion for local only.
Original housing set price is about $ 272.60. (Tax not include)
So the international version's package is different.
Our Tax rule support standard Tax but US Tax does't support standard rule.
In the case of Europe, actually I don't know.
So I'll offer this international version through Pay Gate system.
Anyway you can checkout from KBDcraft.com.
And also all delivery and payment support from it.

***** But I'll support full assembly service with mote cheap prove as possible as I can. ***

Thank you for your question!

kbdcraft wrote:

chanlol wrote:The GB will be about 230$ ?

No!
That price is just for limited open promotion for local only.
Original housing set price is about $ 272.60. (Tax not include)
So the international version's package is different.
Our Tax rule support standard Tax but US Tax does't support standard rule.
In the case of Europe, actually I don't know.
So I'll offer this international version through Pay Gate system.
Anyway you can checkout from KBDcraft.com.
And also all delivery and payment support from it.

***** But I'll support full assembly service with mote cheap prove as possible as I can. ***

Thank you for your question!

Ok，I think I will place my order on KBDcraft.com since I'm based in Asia.

I have been looking for a good custom tenkeyless to build but this is starting to getting me tempted. Quality and design looks great on this board!

tlt wrote: I have been looking for a good custom tenkeyless to build but this is starting to getting me tempted. Quality and design looks great on this board!

Thank you so much.
Now I'm on preparing for GB.
GB for DT will start, soon.

Hello. I sure in your GB, kbdcraft.
There will red middle part available? Even there are more color options?
I can't register on kbdcraft.com Why?

quochung1989 wrote:Hello. I sure in your GB, kbdcraft.
There will red middle part available? Even there are more color options?
I can't register on kbdcraft.com Why?

Ah~ Current GB is special limited promo for local users.
So you can not join it. Sorry but It almost done for DT users. Maybe end of this month...you can join the international GB from here. Thank you for your interesting it.

kbdcraft wrote:

quochung1989 wrote:Hello. I sure in your GB, kbdcraft.
There will red middle part available? Even there are more color options?
I can't register on kbdcraft.com Why?

Ah~ Current GB is special limited promo for local users.
So you can not join it. Sorry but It almost done for DT users. Maybe end of this month...you can join the international GB from here. Thank you for your interesting it.

Sound great. About color option? There are only Silver & Black?
If you can, please let me know

quochung1989 wrote: Sound great. About color option? There are only Silver & Black?
If you can, please let me know

No! International edition will support lot of color options.
All sets base are two tone style.
You can choice one of them; Black, silver, red, light gold... It's not sure but I'll try to offer many options.
Maybe the next week, you can get a news from me.

kbdcraft wrote:

quochung1989 wrote: Sound great. About color option? There are only Silver & Black?
If you can, please let me know

No! International edition will support lot of color options.
All sets base are two tone style.
You can choice one of them; Black, silver, red, light gold... It's not sure but I'll try to offer many options.
Maybe the next week, you can get a news from me.

Great. Waiting for your news.

PS: I like Red & Black

Do you have the key mapping tool for Leeku’s MX1800 PCB?

chanlol wrote: Do you have the key mapping tool for Leeku’s MX1800 PCB?

Member kin25 on geekhack said "Leeku didn't make keymapping tool".

quochung1989 wrote:

chanlol wrote: Do you have the key mapping tool for Leeku’s MX1800 PCB?

Member kin25 on geekhack said "Leeku didn't make keymapping tool".

what? how can I change the layout without keymapping tool?

chanlol wrote:

quochung1989 wrote:

chanlol wrote: Do you have the key mapping tool for Leeku’s MX1800 PCB?

Member kin25 on geekhack said "Leeku didn't make keymapping tool".

what? how can I change the layout without keymapping tool?

Hey hey!!!
Don't worry about it.
Leeku makes new 1800 PCB for this GB.
I produce this PCB in our factory.
That PCB is what you said that it just old one.
You can get new PCB for this LK-1800fe.

chanlol wrote:

quochung1989 wrote:

chanlol wrote: Do you have the key mapping tool for Leeku’s MX1800 PCB?

Member kin25 on geekhack said "Leeku didn't make keymapping tool".

what? how can I change the layout without keymapping tool?

Check new article!
I have remained news for you.
Lk-1800 supported new PCB by Leeku.
This version is different with old one.
It support L3 layerd Full GUI KeyMapping and lot of new functions.
Don't worry about it.

Is it possible to get other collor for anodizing? was thinking about blue, or some other custom finish on the top plate

lolpes wrote:Is it possible to get other collor for anodizing? was thinking about blue, or some other custom finish on the top plate

Possible but this site will not open in this week.
I'll start GB, after clearing PG problem.
I guess It'll take about in one week.

I am getting a TX-1800 from kin25, do you know if the PCB is different or the same version you have here?

Madhias wrote:I am getting a TX-1800 from kin25, do you know if the PCB is different or the same version you have here?

Different version. Mine is newer.

What's the difference between the versions? If there are a lot of nice features I might get one from you then

Madhias wrote:What's the difference between the versions? If there are a lot of nice features I might get one from you then

New version can support GUI key mapping, RGB control, enable seperating space bar with 3 peices and firmware update support.
But old version can not support the same options. Finally, Leeku has no plan of supporting old version any more.