deskthority

Wingklip wrote:

doom2 wrote: Will there be a version compatible with Model F XT?

If soarer or hasu supports it then yes

Anyone need 270 din as well?

Soarer definitely supports it. Not sure about Hasu.

t8c wrote: Screw mounts and I am sold. White and industrial grey!

Screw mounts are here
That's 1 down

Excellent. Let us begin

Who would like to be the first guinea pig? The sacrificial potato to alpha test this?

Alpha will cost 16 with post to Australia lmao
Semi assembled (smashed IBM P70 delete key for comparison)

THAT QUALITY :')

Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Spaceman1200 wrote: Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

Wingklip wrote:

Spaceman1200 wrote: Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

Also it's very cheap to buy because you guys have massive buying power right now

I would be willing to test out but I'm also in the USA.

MercenarySnake wrote: I would be willing to test out but I'm also in the USA.

Shipping will be $2.50 USD, 17$ USD total, about the same in Australia actually

The case itself is only 22mm when closed but when split into two halves sits at a comfortable 11mm each. I can easily cram it into a load of HDPE foam and ship it safely.

Wingklip wrote:

MercenarySnake wrote: I would be willing to test out but I'm also in the USA.

Shipping will be $2.50 USD, 17$ USD total, about the same in Australia actually

The case itself is only 22mm when closed but when split into two halves sits at a comfortable 11mm each. I can easily cram it into a load of HDPE foam and ship it safely.

That sounds good to me.

We can arrange postage for a Saturday dispatch perhaps

There ARE MORE RENDERS!!!!

ALPHA 0.1.1 Also I am now able to mass produce this at around 4 paired pieces a day.

Wingklip wrote:There ARE MORE RENDERS!!!!

ALPHA 0.1.1

Pro Micro Case PS2_MAGNETIC.png

Also I am now able to mass produce this at around 4 paired pieces a day.

Looks good!
Will you try to make an 'Ultimate Converter Box' as well? (with all socket options)

Wingklip wrote:

Wingklip wrote:

Spaceman1200 wrote: Too bad i'm in the USA, otherwise i would love to be the test dummy, What on earth happened to that delete key lol

Lol how much is it to ship A Parcel 17mm thick weighing around 30 grams to the US?

Also it's very cheap to buy because you guys have massive buying power right now

I will. It will be a plug into ps2 type adapter with some switches if you need them. Do I really need to have on and off switches for each of the ports on the 5v lines?

I will have at least 5-6 ports flanking the converter. I will try to make some special magnetic mounting hole or even change out the top for this. It should make it much more compact and modular without wasting valuable space.

Anyways, STL is on the front page.

Notice: Production of blue PLA parts will be paused until a week after due to my Uni going on holidays for that week. Also means I can't mass produce during that time.

But I still have my trashy prusa

The first alpha test batch will be mostly Black PLA and Gray PLA/Blue PLA alongside some small amounts of red ABS sample. The ABS isn't exactly that good of a quality however as the filament is for some stupid reason degrading at high temperatures and jamming at low ones......

Alpha order forms ready for a may dispatch date!

Please fill in so I can get a gist of numbers

https://goo.gl/forms/a4Kyp0D7QJX7ubXH2
Order forms here.

MOAR PHOTOS¡¡!!!

Hey I'm interested in getting one since I just now was able to find out my board is xt rather than at

Good job, Wingklip! Those are looking really good!
GLWS!

Crossfire wrote: Good job, Wingklip! Those are looking really good!
GLWS!

Haha, thanks guys. I'm laying back for a bit for a lot of uni projects and work I have to hand in for the next two weeks. But do expect the industrial gray variant in PLA very soon!

Let's just say that the white color combinations don't look too good (at least to me). Kinda... Not beige enough... as off it came straight outta the kkk

The next big part of the project is designing a universal multi plug adapter for nearly EVERYTHING that has an AT/XT/PS2 scancodes.

That will take ages to make though... Easter break means mailing speed cancer

Responded to the form!

voted!

I see this is gaining traction

Hey, guess what kids! Magnets have arrived! They have just enough force such that it will fly open when you try to bend the microusb port up or down too much! Good news: They fit perfectly
Bad News: Still half of them are unaccounted for xd

Magnets inserted

Hey guys, I have rev 1.1 in the workings! Good news too, I managed to get my 3d printer at home to print at quite a high quality too. Been taking a while to work it properly

Very nice project Wingklip, thanks for sharing the models for printing!

There is a very small tolerance error which causes the two halves to mate with a very small 0.1mm gap. Fixed it in the later models though, unless someone wants it shipped with the 1.0 original version

Wow I dont know how I didnt see this before but this project is cool as hell. Those models look nice btw. Voted and will definitely buy a few of these

Today is a historic day - the first time I will be shipping anything to anyone in the world! Scottex will be the first to receive a sample in agreement to a trade for a much desperately needed SDL cable!

URAH

Great news! I submitted an order for two some time ago!