deskthority

Well, it works! I was going to take a photo, but the camera battery's dead. Preparing a bootable SD card was no problem (I chose the Debian install but the Pi downloads page has others), it powers just fine from a Belkin 1A USB wall charger, and the KBC Poker looks quite happy sitting alongside it too. I need to change the layout if I'm keeping the Poker with it, which looks like it can be done from command line, so I'll give that a go later (Pi expects UK keyboard entry by default).

startx gives a windowed interface, which is a little sluggish by contemporary standards, but better than the struggling networked PCs at work...

Typing this using my Raspi... screen resolution too blocky, but will sort shortly - can select HDMI mode in command line, apparently. Yay!

STOP MAKING ME MORE JEALOUS!

no really.... please stop its not nice

This thread needs more Pics.

Here are some pics...I also have to comment on how silly it is that they are locking all threads about the Ripster over at GH. They don't even want to talk about it!

nathanscribe wrote:Well, it works! I was going to take a photo, but the camera battery's dead. Preparing a bootable SD card was no problem (I chose the Debian install but the Pi downloads page has others), it powers just fine from a Belkin 1A USB wall charger, and the KBC Poker looks quite happy sitting alongside it too. I need to change the layout if I'm keeping the Poker with it, which looks like it can be done from command line, so I'll give that a go later (Pi expects UK keyboard entry by default).

startx gives a windowed interface, which is a little sluggish by contemporary standards, but better than the struggling networked PCs at work...

It's definitely slower by contemporary standards. Even though it boots up and seems ok I would suggest testing the power supply while your Pi is in use using this method: http://elinux.org/RPi_Hardware#Power Scroll down to where it says "How Can I tell if the power supply is inadequate?" I'm using a USB charger for HTC rated at 5v 1A and it really only puts out 4.76v and 700-800mA when I test it using this method.

I had a BT dongle plugged in plus the Ethernet and it got VERY slow. Rebooted and it went ape shit. Unplugged the BT and it was fine.

smknjoe wrote:

IMAG0378.jpg

IMAG0374.jpg

Here are some pics...I also have to comment on how silly it is that they are locking all threads about the Ripster over at GH. They don't even want to talk about it!

Thanks for the picture. That little thing looks great! I wish I'd made the cut. I think I was on the second waiting list. Oh well.

Seriously. I think iMav lost it when he handed the reigns to the 12-year-olds. Oh well.

Any idea when there will be more pie for the rest of us poor bastards?

captain wrote:Any idea when there will be more pie for the rest of us poor bastards?

Good luck getting some if you didn't sign up at RS or Newark during the first week. I see order CODES going for $50+ on eBay right now.

Where's that supply and demand graph when you need it?

smknjoe wrote:I'm using a USB charger for HTC rated at 5v 1A and it really only puts out 4.76v and 700-800mA when I test it using this method.

From what I read, 4.76V would be within tolerance (+/- 5%) and that current measurement means the Pi is only drawing 700-800mA as that is all it requires. If you add something hungry onto the Pi, it would draw more current. So it looks like you're OK.

Mmm Pi.

No winners until someone manages to show the Pi running deskthority.

Still messing with the HMDI modes, so screen dimensions are a bit here & there.

Snap! You beat me to it. Try turning overscan on http://elinux.org/R-Pi_Troubleshooting#Display Nevermind that. It doesn't look like an overscan/underscan problem. Continue on...

...as for ordering one...IDK, they are shipping like crazy now. I would guess a 6-8 week wait. I placed my orders over the first 2-3 days and got my RS code on 5-11. Newark shipped 5-29 and 6-2 (I ordered 3 from them at separate times just trying to make sure my order got through.)

nathanscribe wrote:

smknjoe wrote:I'm using a USB charger for HTC rated at 5v 1A and it really only puts out 4.76v and 700-800mA when I test it using this method.

From what I read, 4.76V would be within tolerance (+/- 5%) and that current measurement means the Pi is only drawing 700-800mA as that is all it requires. If you add something hungry onto the Pi, it would draw more current. So it looks like you're OK.

That's with nothing plugged in but power. It actually drops down to 4.73 and peaks at 4.76 and the Pi is actually pulling about 300mA. Depending on which combination of KB, mouse, USB hub (powered), and Ethernet it bricks on me or is solid as rock. I think lots of people are going to run into power problems whether they relize it or not. I'm going to have to get a new PS myself as all of mine are these HTC chargers.

Good luck with yours. What are your plans for it?

The reason for the different displays is that I was trying out the various modes - if you don't have one already, create a /boot/config.txt file containing something like as default, then once you're running, type to see what your screen supports.
Change the config.txt file accordingly. Ignore me if you know all this.

As for what I'll do with it, I'm going to dabble for a while - get familiar with the command line, learn Python, write simple games and utilities like I used to for the Spectrum... no specific aim yet except to have fun and learn something. You?

I had to create a config file and turn overscan on to get mine to fill the screen when I first got it.

I had originally planned on testing the device as a thin client for terminal servers, but I haven't gotten around to it yet. I also installed xbmc on there to see how it was a HTPC but it was too flaky. So far, I think it's bet suited as a server. With no GUI it's very stable. Also might try setting it up as a mobile network testing device.

A new power supply is a must before I dive in much deeper.

Oh darn, a power supply i got (5v 3A switching adapter from some D-Link network hub) but i just need my PI!!!

Did you get your Pi yet?

I've been using a Cyberpower USB hub to power and expand my Pi(s). Can't remember what my measurements showed exactly, but they were between 4.8-5.15v. Much better than what my HTC chargers were putting out.

smknjoe wrote:Did you get your Pi yet?

I've been using a Cyberpower USB hub to power and expand my Pi(s). Can't remember what my measurements showed exactly, but they were between 4.8-5.15v. Much better than what my HTC chargers were putting out.

The Cyberpower USB hubs are awesome if you need a real powered hub with proper output. Or if you don't since you can unplug them and they'll work as a passive hub.

This is the first one I've had and I like it. I've had a couple of Belkin in the past and they were always a little flaky and after testing the power on one I saw it was only putting out 3 volts!

I've used CyberPower Professional UPSs for years and they are high quality as well.

CyberPower better than TrippLite for sure! It was causing the oddest errors!
http://geekhack.org/showthread.php?3040 ... post586221

I'll have to try their USB hubs.

I hope DT is treating you well Rip. GH is boring as hell now...and did they delete some other member forums besides yours? It seems like something else is missing. Maybe you just had such a massive "presence" that it felt like there were more member subforums!

ItlnStln deleted all his SUBFORUM posts.

He always was a fucking radical!

I would simply be happy if all my posts weren't slowly being deleted or closed to view. I mean I've heard of vultures picking the bones clean but was hoping for SOME Ripster vestiges other than the stolen wiki content.

However the Dude Abides! Just not at GH!

And to get back on topic I bought a Marionberry Pie at Whole Foods last night. Delicious!

http://geekhack.org/showthread.php?3240 ... pi-model-b

Oh my.....

For fuck's sake, I hate people like that.

This is the reason I left GH.

fossala wrote:This is the reason I left GH.

Thats what ripster said

I quit, he got banned.

OK, didn't see that because I don't go on there.