deskthority

Thanks for your answer, 7bit. I would need them for a Cherry MX-Board 3.0 which is a plate-mount keyboard (according to the Deskthority wiki). So I'm not sure if the switches with pins would fit there (but I think one could remove these pins).

You can remove the pins. If it where not just the PCB, but a complete keyboard, you could just open the switches and swap the springs and stems.

Thanks, I will then order some of them. Just one more question: Are you collection the orders or are you sending them as fast as possible? I'm also from Germany, so the delivery itself shouldn't take too long, but it would be nice to have the switches sometime next week or so.

I will pack and ship CherryMX orders within this week.

Hello,
I was wondering if you you are still selling cherry mx switches. If yes, I would like to know if you still have and how many are left.

Dear 7bit. Two questions,
1) where do I find a complete and up to date listing of what you have to offer?
2) you said you will have Cherry plate mount stabs in stock in the next weeks and I shall order STAB200. But to what kind of stabs does "STAB200" refer to, Cherry or Costar? A previous post says that this refers to Costar stabs, not Cherry. I'm confused about this.

Cherry plate mount.

These switches I have in stock and can ship:
ALPSMT: ~300
M9CLEAR: >500
MXRED/DW: >500
MXRED/NW: 448
MXBROWN/DW: >500
MXBROWN/NW: >500
MXCLEAR/NW: >500
MXBLUE/DW: >500
MXBLUE/NW: >500
MXWHITE/NW: >500
MXWHITE/NN: 92
MXGREEN/NN: ~300

7bit wrote: I will pack and ship CherryMX orders within this week.

Thanks, I placed my order and paid it.

BTW: I was quite surprised that we are at the same bank .

Ship them M9s pleeeeease.

Hello, im having trouble with the paypal payment as mine only give the option of Goods/service (in one tab) and Gift only. It doesn't separate payments for Good and service instead it combines them. Also where do i give the text in the paypal payment

There's a option in the shipping address drop down that says that no shipping address is required. That'd make it a service payment. You can add the message on the next step before confirming the payment.

7bit wrote: I will pack and ship CherryMX orders within this week.

So does this mean my 0927 was shipped last week?

Yes.

Zombimuncha wrote:

7bit wrote: I will pack and ship CherryMX orders within this week.

So does this mean my 0927 was shipped last week?

Thank you!
It's very exciting!

Next week, I will definitely get the following items:
HYPER/MICRO-PCBs (Cherry MX)
HYPER/MACRO-PCBs (Cherry MX)
QHACK-PCBs for Alps and Cherry MX
stabilisers in all sizes
Teensy controllers


However, I'm still waiting for the plates ...

I said to myself I'd stop buying prototype/rev 1 boards, but the QHACK has me tempted...

I'm quite sure they will be working.

I do have hundreds of switches and mouse buttons kicking around...it's certainly easier to store them all on a board than loose . I might even have a teensy and a case...hmmm.....

Do you have a pic of the final PCB?

Photos come next week, when I have them here.

7bit wrote: Next week, I will definitely get the following items:
HYPER/MICRO-PCBs (Cherry MX)
HYPER/MACRO-PCBs (Cherry MX)
QHACK-PCBs for Alps and Cherry MX
stabilisers in all sizes
Teensy controllers


However, I'm still waiting for the plates ...

This is great news. When are the plates available?

7bit wrote:

thelectronicnub wrote: My MX Locks came in(not from 7bit though ) https://imgur.com/a/s8oC9 https://imgur.com/a/wJsyI

I'm afraid that killed any hopes they will ever come from me.


Great job of the one who sourced these, BTW.


BTW:
I've found another box full of ALPSMT (tactile switches).

hey 7bit, i was content to let my mxlock order ride if you were going to try to get them sourced, but if you're going to pull the plug I'll just request a refund.

are you pulling the plug?

Hey 7bit, when will the next batches of mx switches be sent?
And what is the status on the mx lock switches?

what is the difference between the CLEARALL command and the Refund command

Package arrived . Matias Quiet Clicks with MX Clears. Right on time to test my Laser cutouts on Monday.

Hi 7bit! Have you shipped #0376 yet?

Any Info for #0919? Thanks.

I would also like to know the status of #0939.

Ask the bot!


0376 has shipped.


These have been packaed the last few days and will ship tomorrow:
0024
0247
0299
0475
0533
0545
0555
0664
0744
0775
0850
0937
0939
0942
0943
0944
0945
0946
0947
0948
0950
0951

wow, that is fast any info on shipping times to germany?

Thanks!!!