mechanical keyboard authority
https://ns1.deskthority.net/
hadn't thought of that. I use QWERTZ etc for 1-0, but making a numpad actually makes a whole lot more sense
It would be great if the Tipro could have stacked layers (to get to layer 3 you first enter layer 2 and now button 1,1 is a fn key to layer 3) so you could mix between numbers and numpad/numlock without wasting many physical keys for layer switches. Controller version 4 can maybe do this ...
7bit wrote:Did you reboot your computer? If it is broken, I can deliver you some replacements really soon now ...kbdfr wrote:Just tried that 32 key unit again and now it does behave in an anormal way. First the codes were accepted but not correctly issued, then I set the unit back to factory default and now it does not accept any programming at all. And I have no time at all to further try anything.
Nevertheless, I've found out that the numpad which came with my 122 key Tipro does not have a controller unit inside. So maybe it is possible to just remove the controller of the MID 32 key units to make them work with the TMC ...
Code: Select all
A1/H/CT/A++++/C----/Dcccc/~$1F,$F0,$1F~$E0,$80,$F0,$E0,$80~~~F13~~~~
A2/S/CT/A----/C----/~~~~~~~~~
A3/H/CT/A++++/C----/Dcccc/~$27,$F0,$27~$E0,$81,$F0,$E0,$81~~~f14~~~~
A4/S/CT/A----/C----/~~~~~~~~~
A5/H/CT/A++++/C----/Dcccc/~$2F,$F0,$2F~$E0,$82,$F0,$E0,$82~~~f15~~~~
A6/S/CT/A----/C----/~~~~~~~~~
A7/H/CT/A++++/C----/Dcccc/~$5E,$F0,$5E~$E0,$83,$F0,$E0,$83~~~F16~~~~
A8/S/CT/A----/C----/~~~~~~~~~
A9/H/CT/A++++/C----/Dcccc/~$08,$F0,$08~$E0,$84,$F0,$E0,$84~~~F17~~~~
A10/S/CT/A----/C----/~~~~~~~~~
A11/H/CT/A++++/C----/Dcccc/~$10,$F0,$10~$E0,$85,$F0,$E0,$85~~~f18~~~~
A12/S/CT/A----/C----/~~~~~~~~~
A13/S/CT/A++++/C----/Dcccc/~$18,$F0,$18~$6C,$F0,$6C~~~f19~7~~~
A14/S/CT/A++++/C----/Duuuu/~~FF 01 02 60 60 02 01 03 02 00 ~~~f19~8~~~
A15/S/CT/A++++/C----/Dcccc/~$20,$F0,$20~$7D,$F0,$7D~~~F20~9~~~
A16/S/CT/A++++/C----/Duuuu/~~FF 01 02 56 56 02 01 03 02 00 ~~~f20~minus~~~
B1/H/CT/A++++/C----/Duuuu/~FF 01 02 29 29 02 01 03 02 00 ~~~~Esc~~~~
B2/S/CT/A----/C----/~~~~~~~~~
B3/H/CT/A++++/C----/Duuuu/~FF 01 02 8B 8B 02 01 03 02 00 ~~~~OK~~~~
B4/S/CT/A----/C----/~~~~~~~~~
B5/H/CT/A++++/C----/Duuuu/~FF 01 02 88 88 02 01 03 02 00 ~~~~OK~~~~
B6/S/CT/A----/C----/~~~~~~~~~
B7/H/L2/A++++/C----/Duuuu/~~~~~~~~~
B8/S/CT/A----/C----/~~~~~~~~~
B9/H/CT/A++++/C----/Dcccc/~$28,$F0,$28~~~~f21~~~~
B10/S/CT/A----/C----/~~~~~~~~~
B11/H/CT/A++++/C----/Dcccc/~$30,$F0,$30~~~~f22~~~~
B12/S/CT/A----/C----/~~~~~~~~~
B13/S/CT/A++++/C----/Dcccc/~$38,$F0,$38~$6B,$F0,$6B~~~f23~4~~~
B14/S/CT/A++++/C----/Duuuu/~~FF 01 02 5D 5D 02 01 03 02 00 ~~~f23~5~~~
B15/S/CT/A++++/C----/Dcccc/~$40,$F0,$40~$74,$F0,$74~~~f24~6~~~
B16/S/CT/A++++/C----/Duuuu/~~FF 01 02 57 57 02 01 03 02 00 ~~~f24~plus~~~
C1/S/CT/A++++/C----/Duuuu/~FF 01 02 3A 3A 02 01 03 02 00 ~~~~f1~~~~
C2/S/CT/A++++/C----/Duuuu/~FF 01 02 3B 3B 02 01 03 02 00 ~~~~f2~~~~
C3/S/CT/A++++/C----/Duuuu/~FF 01 02 3C 3C 02 01 03 02 00 ~~~~f3~~~~
C4/S/CT/A++++/C----/Duuuu/~FF 01 02 3D 3D 02 01 03 02 00 ~~~~f4~~~~
C5/S/CT/A++++/C----/Duuuu/~FF 01 02 3E 3E 02 01 03 02 00 ~~~~f5~~~~
C6/S/CT/A++++/C----/Duuuu/~FF 01 02 3F 3F 02 01 03 02 00 ~~~~f6~~~~
C7/S/CT/A++++/C----/Duuuu/~FF 01 02 40 40 02 01 03 02 00 ~~~~f7~~~~
C8/S/CT/A++++/C----/Duuuu/~FF 01 02 41 41 02 01 03 02 00 ~~~~f8~~~~
C9/S/CT/A++++/C----/Duuuu/~FF 01 02 42 42 02 01 03 02 00 ~~~~f9~~~~
C10/S/CT/A++++/C----/Duuuu/~FF 01 02 43 43 02 01 03 02 00 ~~~~f10~~~~
C11/S/CT/A++++/C----/Duuuu/~FF 01 02 44 44 02 01 03 02 00 ~~~~F11~~~~
C12/S/CT/A++++/C----/Duuuu/~FF 01 02 45 45 02 01 03 02 00 ~~~~F12~~~~
C13/S/CT/A++++/C----/Duuuu/~FF 01 02 46 46 02 01 03 02 00 ~FF 01 02 1E 1E 02 01 03 02 00 ~~~Print~1~~~
C14/S/CT/A++++/C----/Duuuu/~FF 01 02 47 47 02 01 03 02 00 ~FF 01 02 1F 1F 02 01 03 02 00 ~~~Scroll~2~~~
C15/S/CT/A++++/C----/Duuuu/~FF 01 02 48 48 02 01 03 02 00 ~FF 01 02 20 20 02 01 03 02 00 ~~~Pause~3~~~
C16/S/CT/A++++/C----/Duuuu/~FF 01 02 4C 4C 02 01 03 02 00 ~FF 01 04 E5 23 23 E5 02 03 03 02 00 ~~~Del~amp~~~
D1/C/CT/A++++/C++++/Duuuu/~FF 01 02 35 35 02 03 03 03 00 ~~~~tilde~~~~
D2/C/CT/A++--/C++--/~1~{F1}~~~1~1~F1~~
D3/C/CT/A++--/C++--/~2~{F2}~~~2~2~F2~~
D4/C/CT/A++--/C++--/~3~{F3}~~~3~3~F3~~
D5/C/CT/A++--/C++--/~4~{F4}~~~4~4~F4~~
D6/C/CT/A++--/C++--/~5~{F5}~~~5~5~F5~~
D7/C/CT/A++--/C++--/~6~{F6}~~~6~6~F6~~
D8/C/CT/A++--/C++--/~7~{F7}~~~7~7~F7~~
D9/C/CT/A++--/C++--/~8~{F8}~~~8~8~F8~~
D10/C/CT/A++--/C++--/~9~{F9}~~~9~9~F9~~
D11/C/CT/A++--/C++--/~0~{F10}~~~0~0~F10~~
D12/C/CT/A++--/C++--/~-~{F11}~~~-~-~F11~~
D13/C/CT/A++++/C++++/Duuuu/~FF 01 02 2E 2E 02 01 03 03 00 ~FF 01 02 62 62 02 01 03 03 00 ~~~=~0~~~
D14/C/CT/A++++/C++++/Duuuu/~FF 01 02 49 49 02 01 03 03 00 ~FF 01 04 E5 63 63 E5 02 03 03 03 00 ~~~Insert~Del~~~
D15/S/CT/A++++/C++++/Duuuu/~FF 01 02 2A 2A 02 01 03 03 00 ~FF 01 02 2A 2A 02 01 03 03 00 ~~~BackSpace~~~~
D16/S/CT/A++++/C----/Duuuu/~FF 01 02 4B 4B 02 03 03 02 00 ~~~~Prev~~~~
E1/C/CT/A++--/C++--/~{Tab}~{Tab}~~~Tab~~~~
E2/C/CT/A++--/C++--/~q~q~~~Q~~~~
E3/C/CT/A++--/C++--/~w~w~~~W~~~~
E4/C/CT/A++--/C++--/~e~e~~~E~~~~
E5/C/CT/A++--/C++--/~r~r~~~R~~~~
E6/C/CT/A++--/C++--/~t~t~~~T~~~~
E7/C/CT/A++--/C++--/~y~y~~~Y~~~~
E8/C/CT/A++--/C++--/~u~u~~~U~~~~
E9/C/CT/A++--/C++--/~i~i~~~I~~~~
E10/C/CT/A++--/C++--/~o~o~~~O~~~~
E11/C/CT/A++--/C++--/~p~p~~~P~~~~
E12/C/CT/A++--/C++--/~[~[~~~[~~~~
E13/C/CT/A++--/C++--/~]~`~~~]~~~~
E14/C/CT/A++++/C----/Duuuu/~FF 01 02 31 31 02 01 03 02 00 ~~~~\~~~~
E15/C/CT/A++++/C++++/Duuuu/~FF 01 02 4A 4A 02 03 03 03 00 ~~~~Home~~~~
E16/S/CT/A----/C----/~~~~~~~~~
F1/C/CT/A++--/C++--/~{CapsLock}~{CapsLock}~~~Caps~Lock~~~
F2/C/CT/A++--/C++--/~a~a~~~A~~~~
F3/C/CT/A++--/C++--/~s~s~~~S~~~~
F4/C/CT/A++--/C++--/~d~d~~~D~~~~
F5/C/CT/A++--/C++--/~f~f~~~F~~~~
F6/C/CT/A++--/C++--/~g~g~~~G~~~~
F7/C/CT/A++--/C++--/~h~h~~~H~~~~
F8/C/CT/A++--/C++--/~j~j~~~J~~~~
F9/C/CT/A++--/C++--/~k~k~~~K~~~~
F10/C/CT/A++--/C++--/~l~l~~~L~~~~
F11/C/CT/A++--/C++--/~;~;~~~;~;~~~
F12/C/CT/A++--/C++--/~'~'~~~'~'~~~
F13/C/CT/A++--/C++--/~{Enter}~{Enter}~~~Enter~~~~
F14/C/CT/A++++/C++++/Duuuu/~FF 01 02 4D 4D 02 03 03 03 00 ~~~~End~~~~
F15/S/CT/A----/C----/~~~~~~~~~
F16/S/CT/A----/C----/~~~~~~~~~
G1/C/CT/A++--/C++--/~{LShift}~{LShift}~~~Shift~~~~
G2/C/CT/A++++/C++++/Duuuu/~FF 01 02 87 87 02 01 03 03 00 ~~~~87~~~~
G3/C/CT/A++--/C++--/~z~z~~~Z~~~~
G4/C/CT/A++--/C++--/~x~x~~~X~~~~
G5/C/CT/A++--/C++--/~c~c~~~C~~~~
G6/C/CT/A++--/C++--/~v~v~~~V~~~~
G7/C/CT/A++--/C++--/~b~b~~~B~~~~
G8/C/CT/A++--/C++--/~n~n~~~N~~~~
G9/C/CT/A++--/C++--/~m~m~~~M~~~~
G10/C/CT/A++--/C++--/~,~,~~~,~,~~~
G11/C/CT/A++--/C++--/~.~.~~~.~.~~~
G12/C/CT/A++--/C++--/~/~/~~~/~/~~~
G13/C/CT/A++--/C++--/~{RShift}~{RShift}~~~Shift~~~~
G14/C/CT/A++--/C++--/~{Up}~{Up}~~~Up~~~~
G15/C/CT/A++++/C++++/Duuuu/~FF 01 02 5B 5B 02 03 03 03 00 ~~~~Next~~~~
G16/S/CT/A----/C----/~~~~~~~~~
H1/C/CT/A++--/C++--/~{LCtrl}~{LCtrl}~~~Ctrl~~~~
H2/C/CT/A++++/C++++/Duuuu/~FF 01 02 64 64 02 01 03 03 00 ~~~~Meta~~~~
H3/C/CT/A++++/C++++/Duuuu/~FF 01 02 E3 E3 02 01 03 03 00 ~~~~Super~~~~
H4/C/CT/A++--/C++--/~{Alt}~{Alt}~~~Alt~~~~
H5/C/CT/A++--/C++--/Duuuu/~FF 01 02 2C 2C 02 01 03 03 00 ~~~~Space~~~~
H6/C/CT/A++--/C++--/~{AltGr}~{AltGr}~~~Alt~~~~
H7/C/CT/A++++/C++++/Duuuu/~FF 01 02 E7 E7 02 03 03 03 00 ~~~~Super~~~~
H8/C/CT/A++++/C++++/Duuuu/~FF 01 02 65 65 02 01 03 03 00 ~~~~Menu~~~~
H9/C/CT/A++--/C++--/~{RCtrl}~{RCtrl}~~~Ctrl~~~~
H10/C/CT/A++--/C++--/~{Left}~{Left}~~~Left~~~~
H11/C/CT/A++--/C++--/~{Down}~{Down}~~~Down~~~~
H12/C/CT/A++--/C++--/~{Right}~{Right}~~~Right~~~~
H13/S/CT/A----/C----/~~~~~~~~~
H14/S/CT/A----/C----/~~~~~~~~~
H15/S/CT/A----/C----/~~~~~~~~~
H16/S/CT/A----/C----/~~~~~~~~~
Code: Select all
A1/S/CT/A++++/C----/Dcccc/~$E0,$80,$F0,$E0,$80~~~~80~~~~
A2/S/CT/A++++/C----/Dcccc/~$E0,$81,$F0,$E0,$81~~~~~~~~
A3/S/CT/A++++/C----/Dcccc/~$E0,$82,$F0,$E0,$82~~~~~~~~
A4/S/CT/A++++/C----/Dcccc/~$E0,$83,$F0,$E0,$83~~~~~~~~
B1/S/CT/A++++/C----/Dcccc/~$E0,$84,$F0,$E0,$84~~~~~~~~
B2/S/CT/A++++/C----/Dcccc/~$E0,$85,$F0,$E0,$85~~~~~~~~
B3/S/CT/A++++/C----/Dcccc/~$E0,$86,$F0,$E0,$86~~~~~~~~
B4/S/CT/A++++/C----/Dcccc/~$E0,$87,$F0,$E0,$87~~~~~~~~
C1/S/CT/A----/C----/~~~~~~~~~
C2/S/CT/A----/C----/~~~~~~~~~
C3/S/CT/A----/C----/~~~~~~~~~
C4/S/CT/A----/C----/~~~~~~~~~
D1/S/CT/A----/C----/~~~~~~~~~
D2/S/CT/A----/C----/~~~~~~~~~
D3/S/CT/A----/C----/~~~~~~~~~
D4/S/CT/A----/C----/~~~~~~~~~
E1/S/CT/A----/C----/~~~~~~~~~
E2/S/CT/A----/C----/~~~~~~~~~
E3/S/CT/A----/C----/~~~~~~~~~
E4/S/CT/A----/C----/~~~~~~~~~
F1/S/CT/A----/C----/~~~~~~~~~
F2/S/CT/A----/C----/~~~~~~~~~
F3/S/CT/A----/C----/~~~~~~~~~
F4/S/CT/A----/C----/~~~~~~~~~
G1/S/CT/A----/C----/~~~~~~~~~
G2/S/CT/A----/C----/~~~~~~~~~
G3/S/CT/A----/C----/~~~~~~~~~
G4/S/CT/A----/C----/~~~~~~~~~
H1/S/CT/A----/C----/~~~~~~~~~
H2/S/CT/A----/C----/~~~~~~~~~
H3/S/CT/A----/C----/~~~~~~~~~
H4/S/CT/A----/C----/~~~~~~~~~
This way it will be easier to find7bit wrote:There is an export and import function.
Just right-click in the icon of the unit you want and click import or export.
[long, lousy long explanation to be found in the Help function of ChangeMe anyway]
Obviously the problem is the controller of the 32-key unit.7bit wrote:I've just plugged out the controller of the MID 32 key module and plugged the MID 32 key to the TMC122 key.
I can program any key which I can program on the 122 key module. In fact, the key codes are stored in that 122 key TMC.
This includes codes like 0xe080 (enter $E0,$80,$F0,$E0,$80) and up.
Sorry, slipped from my memory (posting this from my Linux box)!kbdfr wrote:This way it will be easier to find7bit wrote:There is an export and import function.
Just right-click in the icon of the unit you want and click import or export.
[long, lousy long explanation to be found in the Help function of ChangeMe anyway]
) or just let it be generated by a script from a minimal source-file ( 
)![1]I do understand several languages, but your question is just like Hebrew or ancient Greek to me.intealls wrote:kbdfr, do you have the pin-out for Tipros 8-pin minidin -> PS/2+RS232 split cable??
(...)
Just for the record guys: Tipros boards are superb but their service (at least the German from Munich) sucks big timekbdfr wrote:Or, of course, asking Tipro for help.
German service? LOL!Spharx wrote:Just for the record guys: Tipros boards are superb but their service (at least the German from Munich) sucks big timekbdfr wrote:Or, of course, asking Tipro for help.
...
There are a lot of shops who sell only to businesses. You won't be able to order there without a VAT number.7bit wrote:Spharx wrote:Also, why don't you pretend you run a shop and need a replacement for whatever reason?
You all doing it wrong!Spharx wrote:I've contacted tipro.si (in English) directly cause I know that German support just sucks nearly everywhere. Either they saw my .de mail or my German IP but the first replay was from the German support
Right form that point I knew that this is not gonna end up good. They have the type of service where you feel that they are reading only half of you message.
Either way there are no anthracite housings. If they are painted can I just overprint them or do I have to remove somehow the old color ?? I don't have any experience in these kind of thinks.
Dear Tipro people,
for the sales department of Spharx Enterprises, we need some samples (see list attached) for evaluation if your POS solutions fulfill our needs.
Best regards,
T. M. Spharx.
i told you that before, but asking is for freeSpharx wrote:....
Either way there are no anthracite housings....
Thanks!CeeSA wrote:desolder the beeper.
if you lock to layer 2 it is fix.
define a key lock to layer 1.
the only different way to switch back to layer 1 is reboot or disconnet and connect the keyboard.
An easy solution if you need only 2 layers: Choose "2 layers" in Preferences -> Keyboard settings -> Number of layers, and then in the menu of your desired toggle key choose Function -> Lock layer up. It will then switch between layer 1 and layer 2 because locking layer up (or down) functions as a loop. The "Lock layer up/down" function is always active in all layers.7bit wrote:I've programmed a 2nd layer for testing but when I switch to it, I can't switch back by pressing that key again.
Really sorry I can't help, but just for curiosity: how many possible configurations are there (considering 8 pin -> PS2 most probably remains 1:1)?intealls wrote:Urk. I'm beat. I can't find the pin-out for the minidin 8 pin -> PS2 + RS232. I just made a cable and trial and errored 24 combinations, but no luck. Does anyone have one of these split Tipro cables and a multimeter??
Obviously the MID housing is ABS, check here A.3. Technical Data:Spharx wrote:(...) Well I thought than lets dye that case ! To do that I have to know witch plastic they have used ( not that it is made of abs and melts in hot water). Answer: No we are not able ( or either don't want) to share that information. Wow thats really top secret! (...)
The cable uses three pins on the RS232 port (if the MID user guide is correct), and there are four unused pins on the mini-din, so 24kbdfr wrote:Really sorry I can't help, but just for curiosity: how many possible configurations are there (considering 8 pin -> PS2 most probably remains 1:1)?intealls wrote:Urk. I'm beat. I can't find the pin-out for the minidin 8 pin -> PS2 + RS232. I just made a cable and trial and errored 24 combinations, but no luck. Does anyone have one of these split Tipro cables and a multimeter??
