Page 1 of 1

Tipro/Cherry compatible relegendable keycaps. -- NEW PRICES!!

Posted: 10 Jun 2016, 16:06
by Miko
New prices!

You can use your own labels on this keycaps. Because this caps (and relegeable keycaps in general) are kind of hard to get at a reasonable price in Europe due to high shipping costs from the US and costumes, I want to start this group buy.
tipro1.JPG
tipro1.JPG (320.61 KiB) Viewed 7712 times
tipro2.JPG
tipro2.JPG (317.59 KiB) Viewed 7712 times
Limited quantity colors:
tipro3.jpg
tipro3.jpg (42.5 KiB) Viewed 7697 times

Image

Ideal for your macro-pad!

0.35€ / piece
0.34€ / piece for at least 15
0.33€ / piece for at least 50

(no additional cost for the different colored ones)


Plus shipping. Shipping from Germany (or from Belgium or the Netherlands if you live there).


This group buy will last 14 days from now on. (e.g. till 24:00 on the 23rd of June). No rolling deadlines. The MOQ was reached.

PM me and state how many you want.

/edit: New prices! Found a different reseller, much lower prices.

Posted: 10 Jun 2016, 18:10
by kbdfr
Just for information, here are the dimensions for your own legends with these caps:
Relegendable.jpg
Relegendable.jpg (60.27 KiB) Viewed 7665 times
Good luck with your GB!

Posted: 11 Jun 2016, 00:21
by Dra
What about 2u caps? I'd love to have some of those

Posted: 11 Jun 2016, 01:22
by Miko
That's probably possible aswell, but I don't know any possible MOQ and prices. Tell me how many you want. Hopefully some other people want them aswell. If there is sufficient demand I can add them.

And thank you, kbdfr. I hope I get another 50 orders. I'm building my monster-macro pad and will use 50 caps myself, but I think most people only want 5-10 and they do not seem to be too popular in general :?

Oh, in case anybody wants a tipro magnet card reader :lol: I will give two away for free (if you order something). :lol:

Posted: 11 Jun 2016, 13:23
by CeeSA
I change 1 card reader vs 1 keycap (but not from this series...) :D

The price seems high to me. Do you order in USA?
DId you ask here: http://www.tipro.net/company/contact-us-company/?

Posted: 11 Jun 2016, 14:19
by Miko
I'll order at a reseller., not tipro itself. The price does not seem to high at all to me. It's for example cheaper than ordering relegendable caps at xkeys in the US (for Europeans). And my profit margin is pretty close to zero. (a bit above 5%, but that has to pay the shipping to me, in the end it's probably a tiny bit below zero, but it's still cheaper for me if i order alone).

What I have found so far on ebay where sets for pretty much the same price, but with fixed, larger quantities.

Posted: 11 Jun 2016, 16:25
by CeeSA
Ordering a product from europe from an US? Reseller?

Have a look here: group-buys-f50/tipro-mid-series-relegen ... ilit=Order

Posted: 14 Jun 2016, 16:54
by Miko
Found a new reseller. New, much lower prices. Anybody interested now?

Posted: 14 Jun 2016, 18:32
by CeeSA
Is black avaible? Is the price for the lower and upper part?
For 100 pcs is there any further discount?

Posted: 14 Jun 2016, 19:49
by Miko
:oops: I did a mistake when calculating the price :oops: :oops: :oops: It's now 3 cents more expensive. I'm very sorry.
CeeSA wrote: Is the price for the lower and upper part?
Yes, it's the price for both parts. If you only want the upper part that's possible aswell, it'd be 0.19 per piece.
CeeSA wrote: Is black avaible?
Yes, but unfortunately it's more expensive. That would be 37 cent per piece, but only if you take at least 50.
CeeSA wrote: For 100 pcs is there any further discount?
Sorry, that's not possbile.

Posted: 18 Jun 2016, 20:16
by Miko
Halve of the time period is over.

I'm not sure if nobody is interested or if everybody is waiting until the last opportunity. I'd appreciate if you ordered early.

Posted: 19 Jun 2016, 11:31
by julientaq
Maybe you should specify how much pieces were ordered. If you only need a few, i think people (including myself) would be
kind enough to get a few pieces if that helps the gb.

and do you have any idea of the shipping cost for other countries in Europe?

Posted: 19 Jun 2016, 13:50
by Miko
So far I haven't go a single order for these 1x1 keys. :(

Shipping to other EU countries should be 1,50 €. (Or 3,7€ for larger quantities)

Posted: 22 Jun 2016, 17:42
by Miko
The MOQ was reached. So if anybody wants only a few keycaps (for example for the macro keys on a gaming keyboard) , that's possible.

Posted: 23 Jun 2016, 00:21
by Miko
The last day has begun, you have about 24h left to order.

Posted: 23 Jun 2016, 00:40
by GEIST
I would like to buy 20 dark grey caps if it's still possible.

Posted: 23 Jun 2016, 09:20
by Miko
Yes , that's still possible today (until 24:00 or 0:00 GMT).