5251 PCB Reproduction and Restoration
Posted: 16 Mar 2021, 23:05
Hi All,
First I want to give a huge thanks to @listofoptions and @pandrew.
As of writing this I’m using the keyboard that was brought back from the dead twice now.
If you just want a PCB and how to set it up just skip this section:
Here is the 3D rendering of the PCB
Here is the physical PCB it's 1.6mm thick
Since these PCBs are new the xwhatsit capsense software really doesn't like the values that it gets from the PCBs. Therefore, you must put QMK on the xwhatsit instead.
You can follow the following guide in order to install QMK on your xwhatsit: https://docs.google.com/document/d/1B6Y ... bOB90/edit
After you have flashed your xwhatsit you can use it with the PCB like normal.
If you require a PCB please feel free to reach out. I will sell them at cost plus shipping from Canada.
First I want to give a huge thanks to @listofoptions and @pandrew.
As of writing this I’m using the keyboard that was brought back from the dead twice now.
If you just want a PCB and how to set it up just skip this section:
Spoiler:
Spoiler:
Spoiler:
You can follow the following guide in order to install QMK on your xwhatsit: https://docs.google.com/document/d/1B6Y ... bOB90/edit
After you have flashed your xwhatsit you can use it with the PCB like normal.
If you require a PCB please feel free to reach out. I will sell them at cost plus shipping from Canada.