deskthority

Fresh from the annals of the Keyboard Institute... A faithful re-creation of the M0110 PCB, single-sided on CEM-1, with accurate markings and a silly cable system to preserve the external appearance of the keyboard.

Status
On sale NOW at kuritakey.store - Until December 1st

Features

• Supports ANSI and ISO layouts

• CEM-1 PCB substrate to preserve acoustic properties

• Accurate markings in the copper layer - no silkscreen!

• Similar solder mask color to the original

• Pro Micro MCU

• Preserves keyboard appearance with some smart cable chopping and re-use of the original 4p4c connector - same pinout as the M0110A PCB

• N-Key Rollover - through-hole diodes only

• QMK and VIA firmware

Pictures

Nice, my M0110B is ready!

soyuz wrote: 22 Oct 2021, 20:15 Fresh from the annals of the Keyboard Institute...
m0110.png

A faithful re-creation of the M0110 PCB, single-sided on CEM-1, with accurate markings and a silly cable system to preserve the external appearance of the keyboard.

Status
Ordering prototypes soon

Features

• Supports ANSI and ISO layouts

• CEM-1 PCB substrate to preserve acoustic properties

• Accurate markings in the copper layer - no silkscreen!

• Similar solder mask color to the original

• Pro Micro MCU

• Preserves keyboard appearance with some smart cable chopping and re-use of the original 4p4c connector - same pinout as the M0110A PCB

• N-Key Rollover - through-hole diodes only

• QMK and VIA firmware

Pictures
kicad_RYaDGWFkiI.png
kicad_Zpds953QU1.png

I love you and I want one!

Ordered prototypes

Protos are here! Some minor revisions to work in, as always with first revision, but 100% workable prototypes this time. The main issue is the inability to replicate the plated through holes that were there for the 4p4c connector on the original PCB, so will add a workaround for this, and pro micro placement is a bit off. I'll probably pick a different finish for the final product as well.

gimme quick!!!!

Can confirm, having assembled this, that the acoustic qualities are excellent. Will be moving towards opening orders very shortly

It's probably too late but I wonder if it would be worth adding a socket for the Adafruit Feather 32u4 Bluefruit LE. The board supports QMK out of the box, has bluetooth, and onboard battery management. There's plenty of room in the case for some sizeable batteries.

I did a handwired one that I absolutely love: viewtopic.php?f=7&t=24940

it is indeed too late