deskthority

It's always nice to see DIY cases! I take it you used a jigsaw to make a donut and glued it to a base? Seems an order of magnitude less difficult than routing a bowl.

By lining it, is it for dampening?

What do you think about construction using joinery (versus routing/carving less pieces)? Is it a ...

Get a clear keyboard cover you often see mechanics load up with oil.

Without modding each keyboard, do you think it may be sufficient to get a metallic strip as a wrist rest, or something to that effect?

BTW, pins 40 and 10 (blank in the matrix on the wiki) route to the Fn key which I desire to be a working APP key.

Fill it in ;) It will of course be accessible since it is a hole in matrix rows and columns used for other keys. I'm only writing really basic firmwares myself. I leave those tasks to ...

Just finished new options mock ups, now in OP. In regard to Mac version, I used what seemed to be the most 'standard' adaptation on 104 PC keyboards. If this is 'wrong' according to most of consensus it can be adjusted as needed.

I take it back... are those updated mockup keys fully colored, or ...

In for some. I'd like to get an idea of what the Black (Mac version) looks like simply because I dislike the Win8 logo. Is it still available (because it's in the form)?

Thanks for letting me know! I normalized my matrix and it matches (at least as wired to a tenkeyless).

BTW, pins 40 and 10 (blank in the matrix on the wiki) route to the Fn key which I desire to be a working APP key.

Hey guys, I've been out of the scene for a long while. Quite easy to do when you're feeling satisfied.

I recently picked up a CM Storm Quickfire Stealth. I would rather its Fn key be a proper Apps/Context Menu key.
So I want to replace the daughterboard on it much like bpiphany's HID Liberation ...

Good to know, thanks. I did notice that a couple of them upon removal were widened by the plate edge (accumulation of shavings in the inside corner, so that blockage also explains why they didn't fully seat)

Anyone else finding Costar stabilizers having a tight fit on the black anodized plate? They are bowing such that the vertical sections are leaning inward towards one another. Wiki instructions had changed, saying filing is no longer required, so I didn't bother :S

Since I have everything but the ...

Do you cut the cables to get the shoe laces on, and then re solder? I want to do this with a 6' right angle cable, and shrink it down to 1', plus pretty orange cover.

That's generally how these are made, to my understanding. If someone is willing to create the connector for least one end from ...

Cool, that sure beats using pliers!

I've been using these for 28 months(?). Dolch replica from SP, ABS; aka GH ROUND 1.

Left alt vs. right alt, respectively.

This is partly why I'm not very enthused about keyboards anymore. I have some PBT keycaps to try out later when a Phantom arrives

it shouldn't be difficult to modify the plugin to parse it out but effort discourages spam

Not bad. You should put the "knots" inside and use alcohol to remove the dot-matrix ink.

Are you doing the same mod, using the same type of switches?

merely a wooden version of the imsto poker aluminium case kinda thing
so that the keyboard just has a bit more weight to it
These preferences sort of contradict one another, if you want to keep the original, sleek profile and expect weightiness and solidness by executing it using wood. It would ...

Hardwood isn't plastic or metal. Instead of breaking like dry spaghetti-from-a-box, it splits along the grain when encountering sufficient impact, so it is fragile when not bulky, requiring extra babying, which is fine if you don't intend on portability. This is why you don't see keyboard cases in ...

I can't say this is the right mouse or best mouse. I'm more empathizing with your situation since our requirements are similar, and this is just what I chose recently. One day of using the mouse and I am finding zero problems so far. There's only so much information that can be explained in text ...

I just got some Steelseries Kinzu (ver.1) from the eBays for fairly cheap because I wanted a plain-looking, basic mouse to replace my Logitech RX1000. I would like this mouse more if the logo were nonexistent. Compared to the RX1000 (great for fingertip-gripping with small hands) it's wider and ...

Unless you maintain a clearcoat on contacted surfaces, even Rit dye will go away in time. I do have an uncanny ability to corrode, however.

http://farm4.staticflickr.com/3506/3818522592_98cc32b67d_z.jpg?zz=1
After a year it began to fade, and here it is currently, in blurry detail to do everyone ...

Your user name: nanu
Number of kits: 1
ANSI Plate: 1
ISO Plate: 0
Country: USA
I noticed that you use a Teensy 2.0 for the controller. Can you exclude this from my order to reduce cost?

-There are 4 extra holes on the PCB for each switch that should provide each stem/spring replacement without ...

Black casing? My best answer for a hard-to-notice fix was to use a hole punch on a single piece of electrical tape, which has a matte sheen that matches typical "plastic texture." Combine that with just not looking at the keyboard, perhaps even omitting the LED holes to make this easier.

Brilliant! The elegant execution of this.. I hope you don't mind terminally lazy modders copying these techniques...

Nice use of vinyl-coated paperclips to reduce the dinging of keycap edges, if you care about that.
I have yet to locally find small paperclips coated in less colorful colors.

in for 1 set

why are ergonomic products always so ugly

I was inspired by a binder clip and made a new unit-sized puller since my brass one fell apart after disuse I might try making a variant with a hinge for bigger keys.

[vimeo]15247292[/vimeo]
http://vimeo.com/15247292