If it works on a Pentium, it should work on an i3.Mind you, all the previously mentioned boards use the same controller which is a Motorola ZC86956P.
Until I can get another one, I'm still blaming the adapter.
G80-1000 LFADE not working
-
Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
All the keyboards that I tested so far (since I opened this topic) have a PC/AT switch. This doesn't change anything since a Pentium class machine would clearly be using AT protocol just the same as my last gen PC If it works on a Pentium, it should work on an i3.
Mind you, all the previously mentioned boards use the same controller which is a Motorola ZC86956P.
Until I can get another one, I'm still blaming the adapter.
If it works on a Pentium, it should work on an i3.Mind you, all the previously mentioned boards use the same controller which is a Motorola ZC86956P.
Until I can get another one, I'm still blaming the adapter.
-
Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
It was the adapter! I just got two adapters from kbdfr (thanks!) and the keyboard works with both!
Now I need to figure out how to replace that DIN connector with a PS/2 one. Or maybe I'll just make my own cable.. moar sexy!
Now I need to figure out how to replace that DIN connector with a PS/2 one. Or maybe I'll just make my own cable.. moar sexy!
-
kbdfr
- The Tiproman
- Location: Berlin, Germany
- Main keyboard: Tipro MID-QM-128A + two Tipro matrix modules
- Main mouse: Contour Rollermouse Pro
- Favorite switch: Cherry black
- DT Pro Member: 0010
That's good newsHalf-Saint wrote:It was the adapter! I just got two adapters from kbdfr (thanks!) and the keyboard works with both!
-
Half-Saint
- Location: Slovenia, Europe
- Main keyboard: Raptor Gaming K1
- Main mouse: Logitech G5 Mk.2
- Favorite switch: Cherry MX Blue
- DT Pro Member: 0058
Ah but I don't want ugly arse straight cables! I want curly ones 
-
off
- Location: the crapper, NL, EU
- DT Pro Member: -
I feel you on that; but two things these have over the curly ones: they're brand spankin new!
And they won't go 'bad' in (a few) years time.
Otoh, I just reused the cable of an MY board, and it was a perfect fit for the g80-3000. Even the case was!
And they won't go 'bad' in (a few) years time.
Otoh, I just reused the cable of an MY board, and it was a perfect fit for the g80-3000. Even the case was!